The most common issue with tile roofing is cracking. When you notice a leaking roof due to a cracked or broken tile, it’s best to hire an experienced roofer to fix the problem correctly without causing further damage to your roof. Typically, small cracks and holes can be easily repaired by filling the defects with plastic roofing cement.
How to Repair a Tile Roof
Despite being relatively heavy and expensive, tile roofs offer an impressive appearance and durability. Many people invest in tile roofs because they often last up to 100 years or more. Besides, fired clay, concrete, and terra cotta tiles can survive storms, high winds, and fire. They are also energy-efficient, easy to maintain, and resistant to decay and insect damage. However, when tiles crack or break due to impact or weather damage, you’ll need to hire a roofing contractor to fix the issue promptly to avoid further water damage to your roof.
Identifying Tile Roof Problems
You should have your tile roof inspected by a professional roofer at least once annually and after major storms to check for cracks and other signs of damage. Common issues that need attention are:
- Broken tiles
- Tiles with minor cracks or holes
- The build-up of debris in the roof valley and gutters
- Defects in the underlayment
If you notice any damage to your tile roof, contact your local roofer immediately to schedule repairs.
How to Repair a Tile Roof
While repairing damaged tiles, your roofer will be careful not to damage other parts of the roof. Your roofer will keep all the tools and materials needed for the job within reach to minimize movements on the roof. These items may include nails, a wire brush, wet saw, hammer, crowbar, mortar, and glue. Depending on the kind of damage on your tile roof, here is how professional roofers often do the repairs.
Small Cracks or Holes
When a tile has small cracks and holes, your roofer will apply plastic roofing cement to seal the defects. They’ll begin by cleaning the damaged area with a wire brush and then use plastic roofing cement to fill the hole or seal the crack.
Cracked or Broken Roof Tiles
When a roof tile has a huge crack or is broken and missing a piece, it will need to be replaced. Your roofer will carefully lift up the tiles just above the broken or cracked one and prop them up with wooden blocks.
Next, they’ll lift out the damaged tile. If it’s attached tightly, your roofer may use a hammer or flat bar to break it and remove the pieces carefully. The nails will then be removed or hammered into the wood beneath to prep the surface. When done, your roofer will apply roofing cement to the area and slide in a new tile. Finally, they’ll return the raised tiles back into position.
If a tile roof springs in leaks, the problem may be with the membrane beneath the tile. Only an experienced roofing contractor can identify such issues and effectively fix them by installing roof felt and metal flashing in areas around walls and roof penetrations. Mark Kaufman Roofing is your trusted roofing contractor to help you with tile roof installation, repair, and replacement in North Port, FL. Contact us today to schedule your appointment!